Pump Parts: Tunsten Ccarbide Plungers, "Rokide" (Chrome Oxide) Plungers, Ceramic Plungers, and more:

Ceramic Plungers

Ceramic plungers work exceptionally well for most saltwater, chemical, and metering applications. IEQ specially-formulated grades of ceramic allow a standard 8 RMS surface finish ? dramatically extending packing life.

Coated Plungers & extension rods

Hard-Co plungers are general service metal plungers used in the majority of cases where ceramic plungers are not desired. These plungers gives the best overall combination of corrosion and wear resistance of our metal coated plungers.

Chrome Oxide ("Rokide") Plungers

Recommended for use in the pumping of amine, glycol, or other fluids requiring restricted lubrication

Tungsten Carbide Plungers

The right choice for most power oil applications

Extension Rods

Made with the same material and process as our Hard-Co plungers.

Stem-Guided Plate Valves

To match your application needs, IEQ Industries Stem-Guided Plate Valves are available in a variety of pressure ratings and material combinations.

Abrasion-Resistant & Specialty Valves

Abrasion-resistant valves are recommended for applications where abrasives are causing premature failure of standard valves and suspended solids dictate the use of an open flow design. Abrasion-resistant valves are especially effective in saltwater disposal service, tank truck, and workover applications.

Plunger Packing

General service 838 plunger packing which is composed of nitrile rubber and synthetic fabric is recommended for service in fresh water, saltwater, propane, butane, gasoline, light or heavy oils, mild chemicals and acids, and most hydraulic fluids.